Plastic bushing ATV H14 D22 pin 14 with cap + bushing

Plastic ATV bush with cap and metal tube, marked in the name as H14 D22 and pin 14. The photo does not mark any dimensions.

• Honestly: the maker did not write a single number on this card's photo. H14, D22 and pin 14 are taken from the name
• The photo shows five parts: two black plastic bushes, a metal tube and two metal cups
• The metal tube is what sets this card apart from the neighbouring one in the same row: the tube runs inside the bushes and stops them compressing each other when the bolt is tightened
• The bush is chosen by three sizes: the inner bore that fits over the pin, the outer diameter that fits into the lever's bore, and the height, which sets the gap
• The plastic bush holds the lever on the pin and slides without lubricant. As it wears, the lever starts to play, and the handlebar rattles over bumps
• Bushes are replaced in pairs, two per lever end: one worn bush gives the same play as two

To be straight with you: the maker gave neither the tube's length nor its inner bore. Which exact model and which years this bush fits, the maker did not state, and we do not guess – but we can compare dimensions: write us your model and year. Before ordering, measure your pin's diameter and the lever's bore – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56