Dirt bike axle d15mm 240mm

Motocross axle: the name reads d15mm and 240 mm, while a red callout in the photo marks 236 mm – only it is not drawn along the axle.

• The axle lies diagonally in the photo, and the 236 mm line is drawn horizontally beneath it: it measures not the axle itself but its projection. So we cannot check the name's 240 mm against this photo, and we do not claim either of the two numbers as exact
• The photo shows a zinc-plated axle with a hex head and a washer at one end, and a fitted nut with a washer at the other. There is no callout for the thread length
• The 15 mm shaft diameter is taken from the name — it is not marked in the photo
• The axle is matched by two dimensions: shaft diameter and length. The diameter must match the wheel bearing's inner race, and the length must be enough to pass through both fork lugs with the nut
• The third dimension is the threaded end: if it's too short, the nut won't grip; if it's too long, it bottoms out before it clamps
• Wheel bearings are often replaced together with the axle: the shop has a separate "Bearings" subcategory in the same section
• Time to replace it when the axle is bent, when the thread is stripped, or when the shaft is worn where the bearing sits

To be straight with you: the dimension line in the photo is not drawn along the axle, so it cannot confirm or rule out the length. Which exact model and which years this axle fits, the manufacturer did not state, and we do not guess — but we can compare dimensions for you: write us your model and year. Before ordering, measure your old axle's shaft diameter and overall length — or send a photo: we will check before you order.

24-month warranty · tel. +370 685 777 56