Bushing metal-rubber-metal 28x22-D10

Suspension bush 28x22-D10, three layers: steel ring, rubber, metal inner for the bolt — 28 mm outside, 22 mm long, Ø 10 mm hole. The rubber takes shock.

• The figures in the name, 28x22-D10, read like this: 28 mm outside diameter × 22 mm length, and D 10 mm is the inner hole for the bolt. Eight of the maker's drawings in this range confirm that reading
• This photo is shared by the whole range — the same one repeats on twenty bush products, so do not judge the sizes from it; they are taken from the name
• With the same 28 mm outside diameter the category also holds 28x21-D9.3, 28x35-D12 and 28x40-D10 — a different length or a different hole
• Torn or hammered-out rubber gives itself away by knocking and play: shake the arm with your hands — if you can feel play in the bush, it is worn

To be straight with you: which machine this bush is meant for, the maker did not write, and we do not guess — write us your model and year, or send a photo of the old part. Before ordering, drive the old bush out or measure its seat: check the diameter of the lug hole, the length of the bush and the thickness of the bolt with a caliper — we will check it before you order.

24-month warranty · tel. +370 685 777 56