Bushing metal-rubber-metal 22x20-D12

Bushing 22x20-D12 – a three-layer suspension bushing: an outer steel ring, rubber in the middle and an inner metal bushing for the bolt. The rubber absorbs impacts and twisting, so the lever or shock absorber eye does not knock, and metal does not rub against metal.

• The numbers in the name, 22x20-D12, read as follows: 22 mm outer diameter × 20 mm length, and D 12 mm is the inner bore for the bolt. This reading is confirmed by eight manufacturer drawings for this line
• This photo is shared across the whole line – the same photo repeats on twenty bushing listings, so do not judge the dimensions from it; they are taken from the name
• Also in the list with the same 22 mm outer diameter: 22x20-D10, 22x25-D10, 22x25-D12 – a different length or a different bore
• Torn or worn-out rubber shows itself as knocking and play: shake the lever by hand – if you feel play in the bushing, it is worn

To be straight with you: which specific machine this bushing is for, the maker did not write, and we do not guess – write us your model and year, or send us a photo of the old part. Before ordering, knock out the old bushing or measure its spot: use a caliper to check the eye's bore diameter, the bushing's length and the bolt's thickness – we will check it before you order.

24-month warranty · tel. +370 685 777 56