FOSTI F31 rear wheel axle d14

FOSTI F31 rear wheel axle: the name gives d14, and the photo marks: 14 mm and 228 mm.

• The 228 mm line in the photo runs the whole length of the axle, the 14 mm arrow rests against the shank
• The photo shows a black axle with thicker ends — these ends rest against the swingarm lugs and stop the axle from sliding
• The axle is chosen by two dimensions: the shank diameter and the length. The diameter must match the wheel bearing's inner ring, and the length must be enough to pass through both fork lugs with the nut
• The third dimension is the thread end: if it is too short, the nut will not catch, and if it is too long, it bottoms out before it clamps
• The wheel bearings are often replaced together with the axle: the shop has a separate subcategory "Bearings" in the same section
• It is time to replace it when the axle is bent, when the thread is stripped, or when the shank is worn through at the bearing seat

To be straight with you: the thread size and length are not marked in the photo. Which specific model and which years this axle fits, the maker did not specify, and we do not guess — but we can compare the dimensions for you: write us your model and year. Before ordering, measure your old axle's shank diameter and overall length — or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56