ATV110 front wheel axle LEFT

ATV110 front wheel axle with a cast body, left side. The photo marks: D 10, D 17, M 14, 88 mm and 95 mm.

• The D 17 arrow points to the smooth section of the shank – the wheel bearing sits on it. M 14 is the end of the thread for the nut
• Two D 10 arrows point to the upper and lower lug: these are the holes for the ball joints. 88 mm measures the gap between those two lugs
• 95 mm measures the shank itself with the thread
• We compared this side’s photo with the right side’s photo point by point: they are mirror images. Overlaid through a mirror the outlines match 72%, and without the mirror – 30%. So these are two different parts, each the mirror of the other
• All five numbers are the same on both sides, so the side is chosen not by the dimensions but by which side is bent on your machine
• Ball joints and wheel bearings are often replaced together with this part – there are separate subcategories for them in the same section of the shop
• Time to replace it is when the part is bent after an impact, when the bearing seat is worn, or when the lug hole has widened

To be straight with you: the depth of the lug holes and the thread pitch are not marked in the photo. Which specific model and which years this axle is for, the maker did not specify, and we do not guess – but we can compare the dimensions: write us your model and year. Before ordering, measure your old axle’s shank diameter and overall length – or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56