Shock absorber height between axes 235mm spring 8mm

Rear shock absorber: the name gives 235 mm between the axles and an 8 mm spring wire, while the photo also shows 260 mm total length and Ø 10 mm for both eye bores.

• The photo has all the sizes needed for choosing: 260 mm total length, 235 mm between eye centres, Ø 10 mm for both eye bores, 8 mm spring wire and 10 mm rod diameter. We checked: the 260 mm line matches the part's outline, and the 235 mm rests on the eye centres
• Honestly: the photo on this card is not a separate photo of this product. We compared the photos point by point – it matches the neighbouring card's photo, and only the numbers written on it differ. So we do not describe the appearance as unique, and we rely only on the labels
• The neighbouring card is the same 235 mm length, but with a 7 mm wire. Comparing the photos, we found they differ by one character: "8" versus "7". Everything else – the spring, the body, the eyes – is the same, point for point
• So the choice between these two must be made by wire thickness, not by the photo: the thicker 8 mm wire gives a stiffer ride
• Measure from the centre of one eye to the centre of the other – that is exactly the length the name gives. The full length of the part with the eye edges is always greater; in some photos it is given as a separate number, and in some it is not
• The second size that needs to match is the eye bore: a bolt thicker than the bore will not fit, and a thinner one will let the eye wobble
• It is time to replace it when oil is weeping from the rod, when the spring has sagged, or when the eye bush has worked loose and rattles over bumps
• This line's shock absorbers sit in two categories in the shop – some in the section "Chassis & suspension", some in the subcategory "Shock absorbers". If you do not find the right length here, open the other one too

To be straight with you: which end's eye goes to the frame and which to the swingarm is not marked in the photo – both eyes are the same, Ø 10 mm. Which specific model and which years this product is for, the maker did not state, and we do not guess – but we can compare dimensions for you: write us your model and year. Before ordering, measure your old shock absorber from eye centre to eye centre and the eye bore diameter – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56