Shock absorber height between axes 325mm spring 10mm

Rear shock absorber with a richly measured diagram: the name gives 325 mm between the axes and a 10 mm spring, while the diagram gives 360 mm overall length and 330 mm between the eye centres.

• The black 360 mm line spans the whole part, the red 330 mm line the gap between the eye centres. The name's 325 mm is not on either line
• The blue 194 mm line measures the spring itself, and Ø 70 mm is its outer diameter
• Important: in the diagram the Ø 12 mm arrow points to the spring coil, and the Ø 10 mm arrow to the eye holes. So the name's “spring 10 mm” corresponds in this diagram to the eye hole, not to the wire. The wire thickness in the diagram is 12 mm
• The eye width is marked as 25 mm at both ends
• Measure from the centre of one eye to the centre of the other – that is exactly the length the name gives. The part's overall length including the eye edges is always greater; some photos give it as a separate figure, and some do not
• The second dimension you need to match is the eye hole: a bolt thicker than the hole will not fit, and a thinner one will let the eye wobble
• The spring wire thickness changes the stiffness: a thicker wire means a harder ride. If your old spring was thinner, the ride will become harder even if the length matches
• Time to replace it: when oil is weeping from the rod, when the spring has sagged, or when a worn eye bush rattles on bumps
• This series of shock absorbers sits in two categories in the shop – some in the “Chassis & suspension” section, some in the “Shock absorbers” subcategory. If you don't find the right length here, open the other one too

To be straight with you: which figure is correct – the name's 10 mm or the diagram's 12 mm – the maker did not explain, so we show both. Which specific model and year this part is for, the maker did not specify, and we do not guess – but we can compare the dimensions: write us your model and year. Before ordering, measure your old shock absorber from eye centre to eye centre and the eye hole diameter – or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56