Front shock absorbers DB (pair)

A pair of front fork legs: in the name they are called front shock absorbers, while the photo shows two long telescopic tubes with black lower bodies.

• This is not a spring-loaded rear shock absorber with eyes, but front fork legs. You choose them differently: by the tube diameter and length, not by the distance between eyes
• The diagram lists three numbers for each leg: 655 mm total length, which splits into 315 mm and 339 mm
• We measured where the Ø arrows end: both point to the wheel axle hole at the bottom of the leg, not to the upper tube. And the diameters of that same hole differ in the diagram: Ø 11,70 mm on one leg, Ø 11,40 mm on the other. This is the maker's own marking, not our measurement
• On one leg three more small holes are marked – Ø 4,87 mm, Ø 8,10 mm and Ø 8,22 mm; these are lugs for the brake and the fender. On the other leg, the photo shows no such lugs
• The diagram gives no upper tube diameter, not even once
• It is time to replace them when a leg is weeping oil, when the tube is scratched, or when the fork is bent after a fall

To be straight with you: the upper tube diameter is not in the diagram, and it is exactly what has to match the clamps on your fork yoke. Which specific model and which year this product is for, the maker did not state, and we do not guess it – but we can compare the dimensions for you: write us your model and year. Before ordering, measure your fork leg's length and the tube diameter – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56