Kickstarter half moon GY6 4T 150cc

Kickstarter half moon GY6 4T 150cc – a shaft with a toothed sector and a return spring: in the drawing, length 158 mm, splined end Ø 13 mm. Compare with your old part before ordering.

• When you press the pedal, the sector turns the kickstart gear, and the spring returns the pedal back up.
• The overall length of 158 mm is marked from the splined end to the opposite end of the shaft, behind the sector.
• Diameters in order: splined end Ø 13 mm, bush Ø 18 mm, shaft Ø 15 mm, behind the sector Ø 12 mm, and the end section Ø 16 mm.
• The photo shows two holes in the sector, a black coil spring with a bent end, and a mark stamped into the sector.
• The two photos differ in more than colour: in the photo the shaft is light-coloured metal, while in the drawing part of the shaft is yellowish; also, in the photo the bush is noticeably shorter relative to the splined end than in the drawing. So we do not promise either the colour or the bush length.
• The photo gives neither the tooth count nor the spline count.

We write only what we know. The drawing gives the shaft diameters, but not the tooth count or the spline count, and you cannot reliably count them from the photo. Before ordering, measure your shaft's length and the splined end's diameter, and send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56