Oil pressure reducing valve (filter) ATV 200/250

Oil pressure reducing valve (filter) ATV 200/250: the photo shows a light-coloured metal body with a splined bore at the end of the neck and a wide round flange, the drawing shows 33 mm, 20 mm and 63 mm. Measure your own old part before ordering.

• Going by the name, this is a pressure reducing valve — in the lubrication system it limits the oil pressure.
• We measured the ends of the lines: 33 mm runs to the outer edges of the neck, 63 mm — to the outer edges of the flange; the flange shows two screws with a straight slot.
• 20 mm is marked across the splined bore at the end of the neck; whether it was measured across the tops of the splines or across their base, we cannot tell from the ends of the lines.
• In the name the part is called both a valve and a filter, but no filter screen or other filtering element is visible in the photo.
• The second photo is shared with the listing "Oil filter HIFLO HF142", so we do not describe this part from it.
• The photo gives neither the part's height nor the pressure the valve is set to.

We write only what we know. The name states only ATV 200/250, with no quad model or engine, and we do not guess them. Before ordering, measure your old part's flange and neck diameter and the splined bore, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56