Air filter low cone D30

Low cone-shaped air filter, fitting diameter 30 mm. An air filter protects the carburettor and cylinder from dust. A clogged filter makes the engine pull worse, and without a filter sand goes straight into the cylinder.

• Fitting diameter 30 mm – the rubber sleeve fits over the carburettor spigot and is tightened with a clamp; clamp included
• Dimensions: overall height 63 mm, filter part 45 mm – measure whether you have that much room
• Filtering element – a mesh: it can be washed and reused, and after washing and drying it is worth oiling it with air filter oil (find it in the "Oils & care" category)
• When to replace: when the element stays grey even after washing, when it is torn, or when the rubber sleeve has hardened and cracked
• The same filter also comes with a 40 mm fitting – you will find it right next to it, in the same list
• An open filter lets through more air than the standard housing: the mixture leans out and the main jet usually needs to go up a size – look for jets in the "Carburettors and their parts" category

We write only what we know. The dimensions are given, but the maker does not state which engine the filter is for. The filter sleeve is measured from the inside, and the carburettor spigot from the outside: measure the spigot’s outer diameter or send us a photo – we will compare it before you order.

24-month warranty · tel. +370 685 777 56