Air filter foam low D42

Low foam air filter, 42 mm connection. All the air the engine draws in passes through the filter: whatever does not get through the element will not reach the cylinder either.

• Connection diameter 42 mm — the rubber sleeve slips onto the carburettor spigot and is tightened with a clamp; the clamp is in the set
• The housing is low — fits where there is little room behind the carburettor
• The foam element can be washed and used again: after washing and drying it well, oil it with air filter oil (it is in the "Oils & care" category) — dry foam lets dust through
• When to change it: when the element stays grey even after washing, when it is torn, or when the rubber sleeve has gone hard and cracked
• Other connection sizes are in the same list
• An open filter instead of the standard housing lets more air through: the mixture goes lean and the main jet usually has to be taken a size up — jets are in the "Carburettors and their parts" category

To be straight with you: the maker states only the connection diameter — not the body dimensions, and not which engine the filter is for. The filter sleeve is measured on the inside and the carburettor spigot on the outside: measure the outside diameter of your spigot or send a photo — we will tell you whether they match.

24-month warranty · tel. +370 685 777 56