Air filter foam with spring rotated KY - D 184 D35

Foam air filter with a rotated sleeve, connector diameter 35 mm; KY-D 184 series. All the air the engine draws in passes through the filter: whatever does not get through the element will not reach the cylinder either.

• Connector diameter 35 mm – the rubber sleeve is fitted onto the carburettor spigot and tightened with a clamp; the clamp is included
• The sleeve is turned to the side – the filter does not sit straight behind the carburettor; check the angle in the photos
• The foam element is washable and reusable: after washing and drying it well, coat it with air filter oil (you will find it in the “Oils & care” category) – dry foam lets dust through
• When to replace it: when the element stays grey even after washing, when it is torn, or when the rubber sleeve has hardened and cracked
• The same filter also comes with a 40 mm connector – you will find it next to this one, in the same list
• An open filter lets through more air than a standard housing: the mixture becomes leaner, and you usually need to fit a larger main jet – look for jets in the “Carburettors and their parts” category

We write only what we know. From the maker we know only the connector diameter; the housing dimensions and which engine the filter is for are not stated. The filter sleeve is measured from the inside, and the carburettor spigot – from the outside: measure the spigot's outer diameter or send us a photo – we will compare it before you order.

24-month warranty · tel. +370 685 777 56