Air filter 35mm rotated 90

Air filter with a 90° sleeve, 35 mm connection: height 134 mm, body 62 mm, width 80 mm — it keeps dust and sand out of the carburettor and cylinder.

• Connection diameter 35 mm — the rubber sleeve slips onto the carburettor spigot and is tightened with a clamp; the clamp is in the set
• Dimensions: height 134 mm, body diameter 62 mm, width 80 mm — measure whether you have that much room
• The sleeve is turned 90° — the filter lies to the side rather than straight behind the carburettor; handy when there is no room left behind it
• The filtering element is a mesh: it can be washed and used again, and after washing and drying it is worth oiling with air filter oil (it is in the "Oils & care" category)
• When to change it: when the element stays grey even after washing, when it is torn, or when the rubber sleeve has gone hard and cracked
• The same filter is made with a 38 mm connection too — it is right next to this one, in the same category
• An open filter instead of the standard housing lets more air through: the mixture goes lean and the main jet usually has to be taken a size up — jets are in the "Carburettors and their parts" category

To be straight with you: we know the dimensions, but which engine the filter is made for, the maker does not state. The filter sleeve is measured on the inside and the carburettor spigot on the outside: measure the outside diameter of your spigot or send a photo — we will tell you whether they match.

24-month warranty · tel. +370 685 777 56