Engine GY6 80cc with 12' wheel, 2 shock absorbers

GY6 80 cm³ rear drive unit for a scooter: 12-inch wheel and mounting for two shock absorbers. One unit — engine, variator, reduction gear and rear axle.

• Mounting for two shock absorbers — if your scooter's rear end is held by two shock absorbers, this is exactly what you need
• Dimensions: height 310 mm, overall length 620 mm, width 330 mm
• Front mounts through rubber bushes: 112 mm between them, 154 mm between the outer edges. Lugs M8
• Designed for a 12-inch rear wheel — the size is printed on the sidewall of the tyre
• Variator (CVT), reduction gear and rear axle in one unit
• Forced air cooling

In the kit, separate from the unit: carburettor, air filter housing, intake sleeve with clamps, CDI, voltage regulator, starter relay and ignition coil.

To be straight with you: you cannot check the number of shock absorbers from the photos — they are shared with the neighbouring unit, so we will check it ourselves before shipping. Stand behind the scooter and count the shock absorbers, read the wheel size off the tyre and photograph the old unit from the side. With that we will not get it wrong.

The same 12-inch unit without the two-shock-absorber marking is a separate item. For a 10-inch wheel you need the unit with the 669 belt.

We have worked with motorcycles, ATVs and mopeds for 18 years — ask us if anything is unclear.

24-month warranty · tel. +370 685 777 56