Variator SUZUKI AD 50 complete

Variator SUZUKI AD 50, complete: the fixed side's diameter is 96,60 mm, the moving side's – 94,25 mm, and the bushing is 39 mm long. Here every part is measured separately.

• Fixed side: diameter 96,60 mm, splined bore 13 mm, and the cooling vanes at the back are 28 mm high
• Bushing: inner 16,15 mm, outer 22 mm, length 39 mm; the moving side's centre bore is marked 21,75 mm – the bushing's outer diameter and that bore are taken from different photos, and they nearly match
• Moving side: diameter 94,25 mm, centre bore 21,75 mm, and 39 mm is marked from the side
• The slider plate is photographed separately: 60 mm is marked between two pins, with a splined bore in the centre
• The list also has “Variator PEUGEOT BUXY 50 complete” – there the bushing is 12 mm inner and 37,80 mm long, so the shafts are different
• The belt is not included with this product – it is sold separately, in the “Variator belts” section
• You will recognise a worn variator by flats on the rollers, worn-through tracks and a shiny cone with the belt's mark pressed into it: a new belt on such a variator thins out quickly again

We write only what we know. Which specific SUZUKI models and years it is for, the maker did not state, and we do not guess. Measure the neck diameter of your crankshaft, the length of your old bushing and the outer diameter of the disc – we will check it before you order.

24-month warranty · tel. +370 685 777 56