Variator HONDA DIO complete

Variator HONDA DIO, complete: the fixed side's diameter is 87 mm, and at its central hole 20 mm is marked. The moving side is assembled with a yellow zinc-plated cover and three cross-head screws — that is its identifying mark in the photo.

• The second photo marks: plate diameter 87 mm and 20 mm at the central hole.
• The first photo marks 12 mm at the inner plate's hole; the same plate is screwed with three cross-head screws to the yellow zinc-plated cover.
• The photos show two parts — the assembled moving side with the cover, and the polished fixed side; the photos have no rollers, bush or sprocket, and whether they are included in the box is not clear from the data we have.
• The listing also has "Variator SUZUKI AD 50 complete" — there, four separate parts are measured across five photos, including a bush 22 mm on the outside and 39 mm long.
• The belt is not included in this item — it is sold separately, in the "Variator belts" section.
• You will recognise a worn variator by flats worn on the rollers, worn-through tracks and a shiny cone with the belt's mark pressed into it: a new belt on such a variator quickly thins out again.
• Supplier code MC 02970 – state it again when ordering.

We write only what we know. Which specific HONDA DIO models and years it fits, the maker did not state, and we do not guess. Measure your crankshaft neck diameter, your old bush's length and the plate's outer diameter — we will check it before you order.

24-month warranty · tel. +370 685 777 56