Variator rollers MALOSSI 15X12 8,3 gr

Variator rollers MALOSSI 15×12, 8,3 g. The photo shows the manufacturer's blister pack with a yellow label, and rollers laid out beside it marked MALOSSI and MADE IN ITALY.

• On the blister's label the product number 66 9420.A0 is legible, while the supplier's data for this item shows M.669417.N0. We do not hide the difference and do not pick a side — we state both sources
• The small text below the barcode and the text on the rollers themselves after MADE IN ITALY is not legible even zoomed in, so we do not copy the weight off the part: 8,3 g and 15×12 are taken from the name
• The bushings are brass, the body is matte black, each roller has raised markings MALOSSI and MADE IN ITALY
• A heavier roller pushes the belt out to a larger pulley diameter sooner and the engine spins at lower revs; a lighter one lets it rev higher before shifting up. The weight is chosen by what is lacking — starting acceleration or top speed
• The listing also has "Variator rollers MALOSSI 15X12 6,5gr" and "Variator rollers MALOSSI 15X12 7,8gr" — the same 15×12 size, lighter
• There are also 15x12 rollers without a manufacturer's mark; that line goes up to 9,0 g, while this MALOSSI roller is 8,3 g
• There is no belt in this listing — it is sold separately, in the "Variator belts" section
• A worn roller stops being round: one side wears down to a flat spot, a rattle appears when moving, and the variator is slow to shift up — all of them are replaced at once, not one at a time
• Supplier code M.669417.N0 — state it again when ordering

We write only what we know. How many rollers are in the blister pack we cannot count from the photo — the pack is sealed, and the rollers laid out beside it overlap each other. Which exact models and years they fit, the manufacturer did not state, and we do not guess. Weigh your old roller and use a caliper to measure its diameter and width — we will check before you order.

24-month warranty · tel. +370 685 777 56