Soldered cable nipple 6x8x2,3

Solder-on cable nipple 6 × 8 mm – a brass tip that is slipped onto the end of the cable and soldered on with solder. There is no bolt: it is held not by clamping but by soldering, so this nipple does not slip even under heavy load.

• Dimensions from the name: diameter 6 mm, length 8 mm, bore for the cable 2,3 mm
• The 2,3 mm bore — that is the thickness of cable that fits into the nipple; measure it with callipers, not by eye
• Shape: a bush with a wider head at one end — the head rests against the socket
• The same listing has solder-on nipples in sizes 3,2×5, 6×5,5, 6×8 and 6×13 mm; the bolt-on ones need no soldering iron
• Supplier code WI LC9011 — give it again when ordering

To be straight with you: whether the nipple is sold singly or in a pack, the manufacturer did not say — the photo shows many of them. Before soldering, clean the end of the cable and apply soldering flux, or the solder will not bond. Write us how many you need and how thick your cable is — we will check with you before you order.

24-month warranty · tel. +370 685 777 56