Rear sprocket 520 36T D41mm

Rear sprocket 520, 36 teeth, D 41 mm – a wheel with teeth on the rear hub. Together with the front sprocket and the chain it makes up the final drive: the tooth count decides whether the machine accelerates faster or runs faster in a straight line.

• The 520 marking – it must match your chain's marking, otherwise the teeth will not fit its pitch
• 188 mm outer diameter – that is what the drawing marks; the 36 tooth count is taken from the name, it is not on the drawing or on the part itself
• Central bore Ø 41 mm – the drawing's arrow points straight at it
• Two different rows of mounting holes – Ø 8,7 mm and Ø 11,7 mm
• The drawings mark two circles: 42 mm and 53 mm between adjacent holes, 60 mm and 75 mm between opposite ones
• Replace all three parts together – on worn teeth a new chain wears out fast and stretches again
• The listing also has a second 520 sprocket with 36 teeth – its centre dimension is 48 mm; the tooth count is the same, only the centre differs
• You'll find other sprockets in the "Sprockets" category, and chains and their joining links in the "Chains" category
• Supplier code WI ZQ7002 AT ZT52036-41 – quote it when reordering

We write only what we know. Which row of holes belongs to which circle is not written on the drawing, so we do not pair them up ourselves. Before ordering, copy the marking off your chain's side plate, count the teeth on the old sprocket, and measure the mounting-hole circle and the central bore – we will check it before you order.

24-month warranty · tel. +370 685 777 56