Rear sprocket 428 47T D58mm

Rear sprocket 428, 47 teeth, D 58 mm – a toothed wheel on the rear hub. Together with the front sprocket and the chain it forms the final drive: the tooth count decides whether the machine accelerates faster or runs faster on the straight.

• The marking 428 must match your chain's marking, otherwise the teeth will not match its pitch
• 47 teeth – that many are counted on the sprocket itself
• The number with the letter D in the name is 58 mm. In diagrams it does not always mark the same thing: usually the central bore, sometimes the hole circle, so before ordering measure both sizes on your sprocket
• The holes lie on one Ø 78 mm circle, and 58 mm marks the central bore in the diagram; between neighbouring holes – 55 mm
• Outer diameter 195 mm, mounting dimension 55 mm
• Replace all three parts together – on worn teeth a new chain wears out quickly and stretches again
• You will find other sprockets in the same category, and chains and joining links in the "Chains" category

We write only what we know. Before ordering, copy the marking from your chain's side plate, count the teeth on the old sprocket, and measure the mounting hole circle and the central bore — we will check before you order.

24-month warranty · tel. +370 685 777 56