Variator rollers 16x13 3,5 gr

Variator rollers 16×13 mm, 3,5 g. Both the size and the weight are taken from the item's name — the photo has not a single number on it.

• This card has the same photo as all the 15x12 items: six black rollers with brass bushes. The file is different, but the picture is the same, so you cannot tell 16×13 mm from 15×12 mm by it, and we do not try to.
• 3,5 g and 16×13 mm — from the name; the photo neither confirms nor denies them.
• A heavier roller pushes the belt out to a larger pulley diameter sooner and the engine spins at lower revs; a lighter one lets it rev higher before shifting up. Weight is chosen for whatever is missing — starting acceleration or top speed.
• The list also has "Rollers MALOSSI 16X13 3,0gr" and "Rollers MALOSSI 16X13 4,1gr" — the same 16×13 size, a neighbouring weight.
• The same 16x13 line, without a maker's mark, continues further — there are heavier ones too, from 4,90 to 7,20 g.
• The list also has "Rollers 15x12 3,5gr" — the same weight, but narrower and lower; if you buy by weight, check the dimensions too.
• This card has no belt — it is sold separately, in the "Variator belts" section.
• A worn roller stops being round: one side wears down to a flat spot, a rattle appears once it starts moving, and the variator is slow to shift the ratio up — they are replaced all at once, not one by one.

We write only what we know. How many rollers go in a package is not visible from the data we have — the photo has six. Which exact models and years they are for, the maker did not state, and we do not guess. Weigh your old roller and use a calliper to measure its diameter and width — we will check it before you order.

24-month warranty · tel. +370 685 777 56