Piston rings 4T 62,25mm

Piston rings 4T, 62,25 mm diameter. The number is taken from the name.

• Piston rings seal the combustion chamber and scrape the oil off the cylinder wall; once worn they let pressure past – compression drops, oil consumption rises and blue smoke comes from the exhaust
• The diameter is taken from the name: there is no number either on the rings themselves or in the photo
• The photo shows five rings: two compression rings, a copper-shiny spring expander, and two thin oil scrapers – that is the composition of a 4T engine kit
• The photo on this card is shared by eight cards in the same list – from 62,00 mm to 63,75 mm – so we do not judge the diameter from it, and we do not describe the appearance from it either
• The same line runs in 0,25 mm steps; neighbours in the list – "Piston rings 4T 62,00mm" and "Piston rings 4T 62,50mm"
• A piston of the same diameter is in the list – "Piston with rings 62,25mm 15mm pin"
• Rings are needed on their own when the piston is still sound – if it is worn too, get the piston with rings: it is sold with matching rings in one kit
• You can tell a worn ring by too much gap at the joint and by the fact that it falls freely inside the cylinder; the whole set of rings is replaced at once, not one at a time

To be straight with you: which specific model and which years they fit, the manufacturer did not write, and we do not guess – write us your model and year. Before ordering, measure your own cylinder bore and the height of the old ring – or send us a photo with a calliper: we will check it before you order.

24-month warranty · tel. +370 685 777 56