Foot brake master cylinder RZ-D009

Foot brake master cylinder RZ-D009: the drawing marks 45 mm between the centres of the mounting lug holes, body length 86.5 mm, and the fluid reservoir is connected by a hose. Compare it with your old cylinder.

• The master cylinder pushes brake fluid to the caliper when the foot pedal is pressed; it is replaced when fluid seeps through it or the piston sticks
• We checked where the dimension lines end: 45 mm — between the centres of the two mounting lug holes, 86.5 mm — from the housing end at the rubber boot to the opposite end, where the bolt with the cross hole is screwed in
• The pushrod is threaded, with a lock nut and a yellow-zinc-plated clevis fork with holes
• The fluid reservoir is white, with a black knurled cap that has the word WARNING embossed on it along with brake-fluid text in several languages; a black hose with two clips connects the reservoir to the cylinder
• At the bolt with the cross hole — two gaskets; the brake hose to the caliper is not in the photo
• Supplier code RZ-D009 — quote it if you order again
• The photo shows neither the piston diameter nor the thread sizes

To be straight with you: the maker did not mark the piston diameter, and which motorcycle or ATV the cylinder is meant for is not written in the name, so we do not guess. Before ordering, measure the distance between your old cylinder's mounting holes and its body length, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56