Hydraulic brake system ATV

Hydraulic ATV brake system – not a single part but a whole chain: a lever with a master cylinder, a hose and a caliper. Nine dimensions are marked in the photos, and the first one worth checking is the handlebar clamp's 21,30 mm.

• On the caliper side: 64 mm, 68,50 mm and 92,15 mm are marked
• On the lever side: 135 mm lever length, 59,50 mm, 33 mm, 14 mm and 12 mm are marked
• What each dimension measures the maker did not write, so we do not assign meanings to them – we compare number with number
• The photo shows the hose already connected at both ends, and the caliper has a black bracket with two holes – the system arrives assembled
• If you need only the caliper and not the whole chain, the list has separate products, for example "Disc brake cylinder (caliper) E" with M8 holes 68 mm apart
• Signs it is time to replace the system – a spongy lever, a damp hose or a sticking piston; the pads are replaced separately

To be straight with you: the hose length, the piston diameter and whether the system arrives filled with fluid, the maker did not specify. The maker did not write which specific model and year it is for, and we do not guess – write us your model and year. Before ordering, measure your handlebar diameter and the distance from the lever to the caliper – or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56