DELTA rear wheel brake caliper

DELTA rear wheel brake backplate — a drum brake plate with the shoes on it: the photo marks a Ø 12 mm axle hole, a Ø 10 mm lever lug hole, 134 mm height.

• Another photo, from the shoe side, marks Ø 130 mm and Ø 110 mm
• What each dimension measures, the maker did not write, so we do not give them meanings — we compare figure with figure
• The photo shows the shoes with two springs, an adjuster lever with a knurled nut and a triangular bracket with a lug — the plate is sold assembled
• The front wheel plate is a separate product in the same category — "DELTA front wheel brake caliper"; its axle hole is Ø 10 mm and not Ø 12 mm, and the Ø 130 mm there is marked as the diameter of the whole plate, not from the shoe side
• The thickness of the shoes is the wear limit: when the friction material is worn down to the metal, the lever swings too far

To be straight with you: the inner diameter of the drum the maker did not write down separately, and what tells the front from the rear is the axle hole — Ø 12 mm against Ø 10 mm. Which exact model and which years it is for, the maker did not write, and we do not guess — write us your model and year. Before ordering, measure the diameter of your own plate, the axle hole and the position of the lever — or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56