Disc brake cylinder (caliper) G

Disc brake caliper marked with the letter G: the mounting holes on the photo are M8 and 95 mm apart — in this row the same gap is 43, 66.5 and 68 mm.

• On a separate photo 6 mm is marked for the pad gap
• What each dimension measures, the maker did not write, so we give them no meanings of our own — we compare figure with figure
• The body is light and unpainted, the bracket black; two pistons can be seen on one side
• The same row in the category: "Disc brake cylinder (caliper) F" — an M10x1.25 thread is written for its union and a 66.5 mm hole spacing
• A caliper is changed not because it wears out, but when the piston sticks, when fluid seeps past the seal or when the pad pin is broken; the pads themselves are a separate replaceable part
• Do not confuse it with the master cylinder: the caliper presses the pads against the disc, and the fluid is fed to it by a separate product — the same category holds "Foot brake master cylinder RZ-D002" and four more of its relatives
• Supplier code WI ZC4101 — quote it when you reorder

To be straight with you: the piston diameter and the hose thread were not given by the maker for this product. Which exact model and which years it is for, the maker did not write, and we do not guess — write us your model and year. Before ordering, measure the spacing of the mounting holes on your caliper, their thread and the thickness of the disc, or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56