Disc brake cylinder (caliper) F

Disc brake caliper, marked with the letter F in the supplier's designation. The only thread the maker wrote against this item is M10x1,25, and the mounting hole spacing is 66,5 mm.

• M10x1,25 is marked in the photo by the upper bolt; what part screws onto it, the maker did not explain
• The body is light-coloured and unpainted; two black pistons are visible and, on the side, two rubber caps
• The same series in the list: "Disc brake cylinder (caliper) G" – M8 holes 95 mm apart, "Disc brake cylinder (caliper) E" – M8 holes 68 mm apart
• A caliper is replaced not because of wear but when the piston sticks, fluid seeps past the seal or a pad pin has broken off; the pads themselves are a separate replaceable part
• Do not confuse it with the master cylinder: the caliper presses the pads against the disc, and the fluid is fed to it by a separate item – the same category has "Foot brake master cylinder RZ-D002" and four more of its relatives
• Supplier code WI ZV41011B – quote it when reordering

To be straight with you: the maker did not give the piston diameter, and M10x1,25 is marked by the bolt, not by the hose connection. Which exact model and which years it is for, the maker did not write, and we do not guess – write us your model and year. Before ordering, measure the spacing of your caliper's mounting holes, their thread and the disc thickness – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56