Fuel pump Aprilia 125

Fuel pump Aprilia 125: a grey metal body with four spigots and two mounting lugs, marked in the drawings as 71 mm, 99 mm, 97 mm and 68 mm. Compare with your old pump before ordering.

• The fuel pump feeds fuel from the tank to the engine's fuel system.
• 71 mm – between the two mounting lugs: the guide lines end in the middle of the holes.
• The 99 mm and 97 mm lines start at the end of the left brass spigot: the 99 mm ends at the end of the long grey spigot, the 97 mm at the right brass one.
• 68 mm is marked vertically: the lines rest on the top and bottom corners of the turned square cover with the screws.
• There are four spigots – two brass and two grey, one long and one short; arrows are cast into the body next to them, but which spigot is for what is not written.
• The square cover is held by four yellowish screws, and in its centre is a round brown mesh. There are no wires or an electrical connector in the photos.
• The photos give neither the spigot diameters nor the pump's output or pressure.

We write only what we know. Which Aprilia 125 models and years this pump is for is not stated in the name, and we do not guess it. Before ordering, measure the distance between your pump's mounting holes and note which hose goes to which spigot, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56