Seat for ATV110/125 B model

Seat for ATV110/125, B model: on the drawing 490 mm long, the wider end — 150 mm, the narrower one — 100 mm wide, the cover is black, finely textured. Measure your own seat before ordering.

• The whole seat is replaced as one piece: the cover is already fastened to the base, and the latch is screwed on underneath.
• The extension lines run down to the outer edges: 490 mm is the length from the corner of the wider end to the tip of the narrower end, 150 mm and 100 mm are the widths of the ends.
• Underneath — a black ribbed base, the cover fastened to it with staples. At the wider end — a latch with a spring and a wire loop, screwed on with two bolts, with several round pins next to it.
• The narrower part of the seat has no metal bracket: just a ribbed mesh and two openings, through which the light-coloured filling is visible.
• The photos give no seat height and no distance between the mounting points.

We write only what we know. Our catalogue has four ATV110/125 seats — B, N, Q and R — and their dimensions and fastenings differ, and the name does not explain what the letter means. Before ordering, measure your seat's length and the width of both ends, compare the position of the latch, and send us a photo of the old seat — we will check it before you order.

24-month warranty · tel. +370 685 777 56