Starter relay with fuse 6 pins

Starter relay with fuse, 6 pins: the photo marks a width of 48 mm, a height of 48 mm and a length of 52 mm, and next to the connector block – the label 4 pins. Measure your old relay before ordering.

• The starter relay is a power switch: the start button only energises its coil, while the relay's own contacts join the thick battery and starter wires
• The width arrow, 48 mm, rests against the outer edges of the black housing; the height arrow, also 48 mm, runs from the top of the housing to the bottom of the fuse
• The second photo marks 52 mm: the dimension line is drawn parallel to the green base and spans it entirely, so this is the part's length in that direction. The part is photographed at an angle, so we do not claim a more precise reading
• The green plastic part has the letters B and M moulded into it – one next to each of the two screw terminals with copper washers and nuts
• Next to those terminals – a four-pin connector block, marked on the photo with the label 4 pins; the two screw terminals and the four connector contacts together make up the 6 pins mentioned in the name, although the maker never wrote that total anywhere
• A yellow-metal blade fuse is inserted at the bottom – it can be pulled out and replaced without removing the relay
• The photo gives no voltage, no coil current and no fuse rating

To be straight with you: the maker did not explain what B and M mean or which connector contact goes to the start button, and we do not guess: mixing up power and control circuits burns the wiring. Which model and year this relay is for is also not stated. Before ordering, measure the width, height and the distance between terminal centres of your old relay, and send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56