Indicator LED 090-14 with EC markings black

LED indicator 090-14, black, with EC markings: the drawing marks 140 mm from the lens tip to the end of the stem, 90 mm along the lens, and M10 at the mounting nut. Compare with your old indicator.

• A turn indicator flashes to show which way you are turning; this one is screwed on by a nut at the end of the stem.
• The drawing's lines run as follows: 140 mm — from the lens tip to the end of the black ribbed stem at the washer, 90 mm — the lens length from the black housing to the tip, Ø 21 mm — across the stem at the base, M10 — the mounting nut, circled.
• Ø 37 mm is marked with a curved arrow across the lens, and at the bottom "2 x 250 mm" is written on a line whose ends do not rest on any part; what exactly these two numbers measure, we do not say.
• The photo shows two identical indicators, while the name is singular; ask us how many pieces are in the pack before ordering.
• The housing and stem are black, the lens is clear and colourless; the LED and EC markings are from the name — we cannot make out any markings on the lens in the photo.
• The photo gives no voltage and no power rating.

To be straight with you. What 090-14 means and what voltage the indicator is for is not written in the name, and we do not guess the electrical data. Before ordering, measure your old indicator's length and its mounting hole, and send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56