Inner tube 22x10-10 TR87, bent valve

Inner tube for ATV 22x10-10 – for a 22-inch wheel: width 10 inches, rim 10 inches, with a bent valve.

• The ATV size 22x10-10 is given in inches: 22 is the overall wheel diameter, 10 is the width, 10 is the rim. Here the first number is not the width but the whole wheel – that is how this system differs from the motorcycle one
• An inner tube is needed when the rim is not airtight or the tyre is not tubeless: the tube keeps the air seal, while the tyre provides shape and grip
• The valve is bent – needed when the rim hole is on the side, or there is too little room by the hub for the pump nozzle
• The list also has a tube of the same 22x10-10 size with a straight valve (TR13). If your rim hole is on the flat part, you need that one, not this one
• The photo is this item's own, not a shared one: it shows exactly the bent brass valve – matching the name
• It is worth replacing not only after a puncture: old rubber hardens, a crack appears at the edge of the valve base, and the wheel starts slowly losing air with no visible hole
• The marking TR87 means a 90° bent valve – the standard ATV rim valve when the hole is on the side

To be straight with you: which specific motorcycle or ATV it fits depends not on the brand but on the tyre size. Take out the old tube or look at the side of the tyre and send us the marking – we will check it before you order.

24-month warranty · tel. +370 685 777 56