Air filter low cone D38

Low cone-shaped air filter, fitting diameter 38 mm. An air filter protects the carburettor and cylinder from dust. A clogged filter makes the engine pull worse, and without a filter sand goes straight into the cylinder.

• Fitting diameter 38 mm – the rubber sleeve fits over the carburettor spigot and is tightened with a clamp; clamp included
• Low body – fits where there is little room behind the carburettor
• Filtering element – a mesh: it can be washed and reused, and after washing and drying it is worth oiling it with air filter oil (find it in the "Oils & care" category)
• When to replace: when the element stays grey even after washing, when it is torn, or when the rubber sleeve has hardened and cracked
• Look for other fitting sizes in the same list
• An open filter lets through more air than the standard housing: the mixture leans out and the main jet usually needs to go up a size – look for jets in the "Carburettors and their parts" category

To be straight with you: the maker gives only the fitting diameter; neither the body dimensions nor which engine the filter is for are stated. The filter sleeve is measured from the inside, and the carburettor spigot from the outside: measure the spigot’s outer diameter or send us a photo – we will tell you whether it matches.

24-month warranty · tel. +370 685 777 56