Air filter high cone multi system D28-32-35

Tall conical air filter, connection diameter 28, 32 or 35 mm. The air filter protects the carburettor and the cylinder from dust. A clogged filter makes the engine pull worse, and without a filter sand goes straight into the cylinder.

• Two rubber inserts and a clamp are included – with them the same sleeve fits onto a 28, 32 or 35 mm spigot
• The housing is tall – before ordering check whether there is enough room for it under the plastics or by the frame
• The filtering element is a mesh: it can be washed and reused, and after washing and drying it is worth coating with air filter oil (you'll find it in the "Oils & care" category)
• When to replace: when the element stays grey even after washing, when it is torn, or when the rubber sleeve has hardened and cracked
• Look for other connection sizes in the same listing
• An open filter lets through more air than a standard housing: the mixture leans out and the main jet usually needs to be taken larger – look for jets in the "Carburettors and their parts" category

We write only what we know. From the maker we know only the connection sizes; it does not give the housing dimensions or which engine the filter is meant for. The filter sleeve is measured from the inside, and the carburettor spigot from the outside: measure the spigot's outer diameter or send a photo – we will compare it before you order.

24-month warranty · tel. +370 685 777 56