Fuel tap vacuum screwed with 2 screws 35mm

Vacuum fuel tap MC WI AI35017: the drawing gives 34 mm between the hole centres (the name says 35), holes Ø 6 mm, length 88 mm. Measure your tank.

• Vacuum means the tap is opened by the engine's own intake vacuum: with the engine off the fuel does not run even if you forget to shut it
• Marked on the drawing: overall length 88 mm, spigots Ø 5 mm and Ø 6 mm, tube Ø 7 mm standing 30 mm proud
• Two mounting holes Ø 6 mm in the flange, 34 mm between centres — the name says 35 mm, so measure the screw spacing on your own tank
• The white Ø 7 mm tube comes out of the side that bolts to the tank and stays inside it
• A rubber gasket on the flange seals the tap against the tank wall
• Supplier code MC WI AI35017 01276 — quote it when you reorder

To be straight with you: which of the two spigots is the vacuum one and which is the fuel one is not marked on the drawing — so we do not write it. Nor is it stated what machine the tap is for. Before ordering, measure the screw spacing on your tank and your hose diameters, and send a photo of the old tap — we will check it before you order.

24-month warranty · tel. +370 685 777 56