Fuel mixture manifold 4T 125cc

Rubber fuel mixture manifold for a 4T 125 cc engine: 62 mm, 63 mm, Ø 28 mm and Ø 22 mm in the drawing. Measure your flange and carburettor neck before ordering.

• The manifold connects the carburettor to the cylinder head; the rubber hardens and cracks over time, and air drawn in through the cracks leans out the mixture.
• The side view marks 62 mm high and 63 mm long.
• The carburettor-side rubber sleeve is Ø 28 mm, the engine-side port is Ø 22 mm.
• 51 mm is marked across the flange, but the line ends rest on the outer edges of the bolt holes, so this is not the gap between the hole centres.
• The photo shows two bolt holes, a brass vacuum spigot and a metal clamp with a bolt.
• The photo gives no thread marking, no rubber grade and no list of compatible models.

We write only what we know. We do not have this card's supplier code, so we do not print one. Before ordering, measure the gap between the bolt holes and the diameter of the carburettor neck, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56