Radiator with fan for coolant ATV

ATV coolant radiator with fan: in the drawing the radiator is marked 275 mm across its full width, the upper mounting lug holes are 156 mm apart from each other, and the side holes of the fan – 164 mm. Compare these dimensions with your radiator.

• The radiator cools the engine coolant, and the fan blows air through its core.
• The radiator is black, with two side tanks: on one – a cap on top with a small spigot beside it, a round bore and a straight spigot at the bottom; on the other – a bent spigot on top and a small protruding part at the bottom.
• Mounting lugs – two on top and two at the bottom: the 156 mm lines end at the holes of the upper lugs, 190 mm – between the left upper and lower lug holes; the 275 mm line on the left rests on the edge of the tank, on the right – at the end of the lower spigot.
• A diagonal 166 mm arrow connects two unpainted plates with small holes on the core.
• The fan is black, in a square frame with a diamond-shaped flange: 100 mm – between two upper frame holes, 164 mm – between the side flange holes.
• A black cable with red and black wires runs from the fan, with cylindrical terminals at their ends; which wire connects where and at what voltage is not marked in the photo.

To be straight with you: the name states only ATV, with no quad model, and the cap pressure and the fan voltage are not on the card, so we do not promise fitment. Before ordering, measure the distances between your radiator's mounting holes and the positions of the spigots, send us a photo of the old radiator — we will check it before you order.

24-month warranty · tel. +370 685 777 56