Carburettor jet M6 1,20

Carburettor jet M6, hole 1,20 mm. A jet (nozzle) is a small screw with a calibrated hole: petrol going into the airflow is metered through it. A bigger hole lets through more petrol – the mixture is richer; a smaller one lets through less – the mixture is leaner.

• M6 thread and a 1,20 mm hole – both must match what you unscrew from your carburettor
• Supplier code WI AI302052 – quote it if you order again
• You will change it in a few minutes: unscrew the bottom of the carburettor, unscrew the old one, screw in the new one
• After changing the exhaust, air filter or cylinder, the mixture usually leans out, and the main jet has to be taken a size bigger – the size is chosen by trying, not by calculating
• Neighbouring M6 thread sizes – 1,15 and 1,25 mm; look for such jets and their kits in the "Carburettors and their parts" category

We write only what we know. The maker states only the thread and the hole – not which carburettor the jet is for, nor whether it will sit as the main jet or the idle jet in yours. Jets with the same thread differ in length and head between carburettors, so compare it with the old one or send us its photo – we will tell you whether it matches.

24-month warranty · tel. +370 685 777 56