Carburettor jet M6 0,90

Carburettor jet M6, hole 0,90 mm. The jet (nozzle) is a small screw with a calibrated hole: petrol going into the air stream is metered through it. A bigger hole lets through more petrol – the mixture is richer; a smaller one lets through less – the mixture is leaner.

• Thread M6 and hole 0,90 mm – both have to match what you unscrew from your carburettor
• Supplier code WI AI302046 – quote it if you reorder
• Takes a few minutes to swap: unscrew the bottom of the carburettor, unscrew the old one, screw in the new one
• After changing the exhaust, air filter or cylinder, the mixture usually leans out, and you need a bigger main jet – the size is found by testing, not by calculation
• Neighbouring M6 thread sizes are 0,85 and 0,95 mm; look for these jets and jet kits in the "Carburettors and their parts" category

To be straight with you: the jet is only marked with the thread and the hole. The maker does not say which carburettor it is meant for, or whether it will be the main jet or the idle jet in yours. Jets of the same thread differ in length and head shape between carburettors, so a matching thread alone is not enough: compare it with the old one or send us its photo – we will tell you if it matches.

24-month warranty · tel. +370 685 777 56