Carburettor jet M6 0,55

Carburettor jet M6, 0,55 mm hole. The jet (nozzle) doses the petrol that enters the air stream. The mixture richness depends on the hole size: bigger – more petrol, smaller – less.

• M6 thread and 0,55 mm hole – both must match what you unscrew from your carburettor
• You'll change it in a few minutes: unscrew the carburettor's base, unscrew the old one, screw in the new one
• After changing the exhaust, air filter or cylinder, the mixture usually leans out, and you need to take a bigger main jet – the size is chosen by testing, not by calculation
• Neighbouring M6 thread sizes are 0,50 and 0,60 mm; look for such jets and jet kits in the category "Carburettors and their parts"

We write only what we know. The maker states only the thread and the hole – not which carburettor the jet is meant for, nor whether it will sit in yours as the main jet or the idle jet. Jets with the same thread differ in length and head between different carburettors, so compare it with your old one or send us a photo of it – we'll tell you if it matches.

24-month warranty · tel. +370 685 777 56