Carburettor jet M6 0,83

Carburettor jet M6, hole 0.83 mm. The jet (nozzle) meters the petrol that enters the air stream. The size of the hole determines how rich the mixture is: bigger – more petrol, smaller – less.

• Thread M6 and hole 0.83 mm – both must match what you unscrew from your carburettor
• Supplier code WI AI3020441 – if you order again, quote it
• You will replace it in a few minutes: unscrew the carburettor's bottom, unscrew the old one, screw in the new one
• After changing the exhaust, air filter or cylinder, the mixture usually becomes leaner, and the main jet has to be taken larger – the size is chosen by testing, not by calculation
• Neighbouring M6-thread sizes – 0.80 and 0.85 mm; look for such jets and jet sets in the "Carburettors and their parts" category

We write only what we know. The manufacturer states only the thread and the hole – it does not state which carburettor the jet is meant for, nor whether it will sit in yours as the main jet or as the idle jet. Jets of the same thread differ in length and head between different carburettors, so compare it with the old one or send us its photo – we will tell you if it matches.

24-month warranty · tel. +370 685 777 56