Inner tube 4,00x10, bent valve

Inner tube 4.00x10 — for a 4.00-inch wide tyre on a 10-inch rim, with a bent valve.

• The size 4.00x10 is given in inches: 4.00 is the tyre's cross-section width, 10 is the rim diameter. The same size is written elsewhere with a hyphen — 4.00-10; it is the same inner tube
• An inner tube is needed when the rim does not seal or the tyre is not tubeless: it holds the air-tightness, while the tyre gives the shape and grip
• Bent valve — this type is needed when the rim hole is on the side, or there is too little room near the hub for a pump nozzle
• This product's photo is shared with the 3.00x12 inner tube with a bent valve — you cannot determine the size from it, so rely on the name
• The photo tells you nothing here: an inner tube without air is simply a black rubber ring, and the size is written only in the name and on the sidewall of your tyre

To be straight with you: which specific motorcycle or ATV it fits depends not on the brand but on the tyre size. Take out the old tube or look at the sidewall of the tyre and send us the marking — we will check it before you order.

24-month warranty · tel. +370 685 777 56