Inner tube 2,50x10, bent valve

Inner tube 2,50x10 – for a 2,50-inch-wide tyre on a 10-inch rim, with a bent valve.

• The size 2,50x10 is given in inches: 2,50 is the tyre's cross-section width, 10 is the rim diameter. The same size is written elsewhere with a hyphen — 2,50-10; it is the same inner tube
• An inner tube is needed when the rim is not airtight or the tyre is not tubeless: it holds the air seal, while the tyre holds the shape and the grip
• The valve is bent — that kind is needed when the rim hole is on the side, or there is too little room by the hub for the pump nozzle
• The listing has the same 2,50x10 size inner tube with a straight valve. If your rim hole is in the flat part, take that one
• This product's photo is shared with the 130x60-13 and 120x90-10 inner tubes — you cannot tell the size from it, so go by the name
• The photo tells you nothing here: an inner tube with no air is simply a black rubber ring, and the size is written only in the name and on the side of your tyre
• Supplier code MC 10753 — give it again when ordering

To be straight with you: which exact motorcycle or ATV it fits depends not on the brand but on the tyre size. Take out your old inner tube or look at the side of the tyre and send us the marking — we will check it before you order.

24-month warranty · tel. +370 685 777 56