Bushing metal-rubber-metal square hole 30x30-10x10

Bushing, square hole 30x30-10x10 – a three-layer suspension bushing: an outer steel ring, rubber in the middle and an inner metal bushing for the bolt. The rubber absorbs impacts and torsion, so the lever's or shock absorber's eye does not knock, and metal does not rub against metal.

• The numbers in the name, 30x30-10x10, read as follows: 30 mm outer diameter × 30 mm length, and 10x10 – a square 10 × 10 mm bore
• The maker's drawing marks: 30 mm diameter, 10 mm across the bore, 30 mm length – the same figures as in the name
• The inner bore is clearly square in the photo, not round – that is how it differs from the 30x30-D10
• In the list, with the same 30 mm outer diameter, there are also the 30x21-10x10, 30x22-D12, 30x30-D10 – with a different length or a different bore
• Torn or worn-out rubber gives itself away with a knocking noise and play: shake the lever by hand – if you feel play in the bushing, it is worn

To be straight with you: the square bore does not allow rotation, so the bolt or pin in it must also have a square profile – a round bolt will not hold here. Which specific machine this bushing is for, the maker did not write, and we do not guess – write us your model and year or send a photo of the old part. Before ordering, knock out the old bushing or measure its place: check the eye's bore diameter, the bushing's length and the bolt's thickness with calipers – we will check it before you order.

24-month warranty · tel. +370 685 777 56