Bushing metal-rubber-metal for shock absorber 20x19-D8

Bush 20x19-D8 – a three-layer suspension bush: an outer steel ring, rubber in the middle and an inner metal sleeve for the bolt. The rubber absorbs impacts and twisting, so the lever's or shock absorber's lug does not knock, and metal does not rub against metal.

• The numbers in the name, 20x19-D8, read as follows: 20 mm outer diameter × 19 mm length, and D 8 mm is the inner bore for the bolt. Eight of the manufacturer's drawings in this line confirm this reading
• The manufacturer's drawing marks: 20 mm diameter, 8 mm bore, 19 mm length – the same numbers as in the name
• The inner bush is round; the name states it is for a shock absorber
• The other bushes in this line are written the same way in the list – "diameter x length − D bore"; search for yours by your own dimensions, e.g. 23x35-D10
• Torn or worn-out rubber shows itself as a knock and play: shake the lever by hand – if you feel play in the bush, it is worn

To be straight with you: the manufacturer's data says only that the bush is for a shock absorber; for which machine and which shock absorber – no. Write us your model and year, or send a photo of the old part. Before ordering, knock out the old bush or measure it in place: use a caliper to check the lug bore diameter, the bush length and the bolt thickness – we will check it before you order.

24-month warranty · tel. +370 685 777 56