One-way bearing (bendex) ATV200

One-way bearing (bendex) ATV200. The photo shows an outer diameter of 88 mm, and three mounting holes with gaps of 64 mm and 59 mm.

• The second photo shows 46 mm and 42 mm – these are the dimensions of the inner part
• The manufacturer did not write what each dimension measures, so we do not assign them a meaning — we simply compare number to number
• The photo shows a steel flange with three holes, and inside it a roller cage of the one-way bearing; there is no gear here
• If you need the bendex TOGETHER with the gear, there is a separate item in the list — "One-way bearing with gear (bendex) SHINERAY" with a Ø 88 mm bendex and a Ø 122 mm 59T gear
• The one-way bearing (bendex) lets the starter turn the engine and disengages once the engine starts; when worn it slips — the starter screams while the engine does not turn
• The bearing needs replacing when play appears, when you hear a hum or a crackle while turning it by hand, or when the rollers leave visible marks on the race

To be straight with you: the manufacturer did not state the shaft bore diameter or the thread of the mounting bolts. Which specific model and which year it is for, the manufacturer did not write, and we do not guess — write us your model and year. Before ordering, measure your bendex's outer diameter, the shaft bore and the gap between the mounting holes — or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56