One-way bearing (bendex) ATV110/125

One-way bearing (bendex) ATV110/125. The photo shows an outer diameter of 75 mm, an inner bore of 27 mm and 50 mm between two of the mounting holes; there are four holes in total.

• The photo shows a steel body with three large rollers — this is a sprag-type one-way bearing, not a cage type
• The second photo shows the same part ALREADY FITTED into a Ø 109 mm magneto rotor, with 50 mm and 18 mm marked next to it. The rotor is a separate item — it is not included with this card
• If you need the bendex TOGETHER with the gear, there is a separate item in the list — "One-way bearing (bendex) with gear ATV110/125, for the JH110 engine"; it is for the same ATV110/125 line, but the gear is already included
• The manufacturer did not write what each dimension measures, so we do not assign them a meaning — we simply compare number to number
• The one-way bearing (bendex) lets the starter turn the engine and disengages once the engine starts; when worn it slips — the starter screams while the engine does not turn
• The bearing needs replacing when play appears, when you hear a hum or a crackle while turning it by hand, or when the rollers leave visible marks on the race
• Supplier codes MC 06797 · MO 5906312659439 — quote them again when ordering

To be straight with you: the rotor visible in the photo is not part of this item, and the manufacturer did not explain the relationship between the shaft bore and the 27 mm. Which specific model and which year it is for, the manufacturer did not write, and we do not guess — write us your model and year. Before ordering, measure your bendex's outer diameter, the shaft bore and the gap between the mounting holes — or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56