One-way bearing (bendex) for 13mm shaft 3KJ motor

One-way bearing (bendex) for a 13 mm shaft, for a 3KJ engine. In the photo the maker wrote "68 teeth", and the 13 mm from the name is marked at the splined bore – that is the main dimension for selection.

• Other marked numbers: 105 mm, 93 mm, 59 mm and 19 mm
• What each dimension measures, the maker did not write, so we do not assign meanings to them – we compare number to number
• The photo shows a gear with an inner roller cage and a black plate, screwed on with three bolts – the bendex arrives assembled
• Another relative of this line in the list is "One-way bearing (bendex) 16mm shaft KEEWAY" – its shaft is thicker, so do not mix up 13 mm and 16 mm
• The one-way bearing (bendex) lets the starter turn the engine and disengages once the engine starts; when worn, it slips – the starter howls and the engine does not move
• The bearing is replaced when play appears, a hum or crackle is heard when turning it by hand, or when the rollers leave visible marks on the track

To be straight with you: the "68 teeth" label was put on the photo by the maker; we did not count the teeth ourselves. Which specific model and year it fits, the maker did not write, and we do not guess – write us your model and year. Before ordering, measure your bendex's outer diameter, shaft bore and the mounting-hole spacing – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56